Установка Gentoo Linux на ноутбук DEXP Atlas A15-I3W400.

# These settings were set by the catalyst build script that automatically
# built this stage.
# Please consult /usr/share/portage/config/make.conf.example for a more
# detailed example.
# Значение COMMON_FLAGS необходимо задать, иначе при сборке пакета gcc будет ошибка.
COMMON_FLAGS="-O2 -pipe -march=alderlake -mabm -mno-kl -mno-pconfig -mno-sgx -mno-widekl -mshstk --param=l1-cache-line-size=64 --param=l1-cache-size=32 --param=l2-cache-size=10240"
CFLAGS="${COMMON_FLAGS}"
CXXFLAGS="${COMMON_FLAGS}"
FCFLAGS="${COMMON_FLAGS}"
FFLAGS="${COMMON_FLAGS}"
MAKEOPTS="-j3"
# Флаг -getbinpkg означает, что пакеты будут собираться из исходников. Если есть желание воспользоваться уже собранными пакетами, то строку FEATURES нужно закомментировать знаком #.
FEATURES="${FEATURES} -getbinpkg"
ACCEPT_LICENSE="*"

USE="abi_x86_64 abi_x86_32 emoji ibus heif mng xpm uils tools dc1394 dts faad -minimal whatsapp irc btpclient deprecated experimental extra-tools test-programs fontforge utils lzma plasma alsa-plugin sqlite maps pulseaudio python wep wps fontforge utils lz4 lzma webp dec265 enc265 gtk kde glx plasma plugins tools utils extra icons gui offlinehelp postgres icu  blender video zeroconf firmware lcms extras mp3rtp sndfile rar rrsync stunnel cookie-check metalink fonts odbc http https nmea flite pixeltool qdoc qmlls qtdiag qtplugininfo appindicator kwallet webengine activities geolocation cryptsetup X evdev ffmpeg fftw opengl rav1e svt-av1 avif iptables doh geoip keyutils conntrack dhcp-tools libidn2 http2 geoip2 fuse mount-ntfs ntfsdecrypt ru-dv ru-i ru-k lzip libssh2 ncat ndiff nping zenmap gsm iec61883 ieee1394 jpegxl ladspa librtmp modplug qrcode samba ssh zimg dvb javascript resolvconf positioning aptx ldac mpg123 epub markdown mobi zip quicktime mtp sddm clang kerberos corefonts libusb0 amrenc twolame pcap lspclient websockets animgif wifi tray wayland-compositor xwayland curl programs androiddump ciscodump http3 sshdump libusb mqtt gimp dia midi svg2 websocket pipewire-alsa sound-server"
GPSD_PROTOCOLS="nmea0183"
L10N="en en-US ru"
CPU_FLAGS_X86="aes avx avx2 avx_vnni bmi1 bmi2 f16c fma3 mmx mmxext pclmul popcnt rdrand sha sse sse2 sse3 sse4_1 sse4_2 ssse3 vpclmulqdq"
INPUT_DEVICES="libinput evdev synaptics"

# NOTE: This stage was built with the bindist USE flag enabled

# This sets the language of build output to English.
# Please keep this setting intact when reporting bugs.
LC_MESSAGES=C.UTF-8

# / was on /dev/nvme0n1p5 during installation
/dev/nvme0n1p5  /               ext3    noatime                 0 1
# /boot/efi was on /dev/nvme0n1p1 during installation
/dev/nvme0n1p1  /boot/efi       vfat    noatime                 0 0

/dev/nvme0n1p6  /mnt/data       ext3    noatime,user,exec,rw    0 2

/dev/nvme0n1p3  /mnt/windows    ntfs    noatime,umask=0,rw,exec 0 3
/dev/nvme0n1p4  /mnt/windata    ntfs    noatime,umask=0,rw,exec 0 4

proc            /proc           proc    defaults                0 0
shm             /dev/shm        tmpfs   nodev,nosuid,noexec     0 0

# Global OpenRC configuration settings

# Set to "YES" if you want the rc system to try and start services
# in parallel for a slight speed improvement. When running in parallel we
# prefix the service output with its name as the output will get
# jumbled up.
# WARNING: whilst we have improved parallel, it can still potentially lock
# the boot process. Don't file bugs about this unless you can supply
# patches that fix it without breaking other things!
rc_parallel="NO"

# Set rc_interactive to "YES" and you'll be able to press the I key during
# boot so you can choose to start specific services. Set to "NO" to disable
# this feature. This feature is automatically disabled if rc_parallel is
# set to YES.
rc_interactive="YES"

# Set to "NO" if you don't want pam_openrc autostarting user services. This
# effectively disables the pam module, without the need of removing it from
# the pam configuration files.
#rc_autostart_user="YES"

# If we need to drop to a shell, you can specify it here.
# If not specified we use $SHELL, otherwise the one specified in /etc/passwd,
# otherwise /bin/sh
# Linux users could specify /sbin/sulogin
rc_shell=/sbin/sulogin

# Do we allow any started service in the runlevel to satisfy the dependency
# or do we want all of them regardless of state? For example, if net.eth0
# and net.eth1 are in the default runlevel then with rc_depend_strict="NO"
# both will be started, but services that depend on 'net' will work if either
# one comes up. With rc_depend_strict="YES" we would require them both to
# come up.
#rc_depend_strict="YES"

# rc_hotplug controls which services we allow to be hotplugged.
# A hotplugged service is one started by a dynamic dev manager when a matching
# hardware device is found.
# Hotplugged services appear in the "hotplugged" runlevel.
# If rc_hotplug is set to any value, we compare the name of this service
# to every pattern in the value, from left to right, and we allow the
# service to be hotplugged if it matches a pattern, or if it matches no
# patterns. Patterns can include shell wildcards.
# To disable services from being hotplugged, prefix patterns with "!".
#If rc_hotplug is not set or is empty, all hotplugging is disabled.
# Example - rc_hotplug="net.wlan !net.*"
# This allows net.wlan and any service not matching net.* to be hotplugged.
# Example - rc_hotplug="!net.*"
# This allows services that do not match "net.*" to be hotplugged.

# rc_logger launches a logging daemon to log the entire rc process to
# /var/log/rc.log
# NOTE: Linux systems require the devfs service to be started before
# logging can take place and as such cannot log the sysinit runlevel.
#rc_logger="NO"

# Through rc_log_path you can specify a custom log file.
# The default value is: /var/log/rc.log
#rc_log_path="/var/log/rc.log"

# If you want verbose output for OpenRC, set this to yes. If you want
# verbose output for service foo only, set it to yes in /etc/conf.d/foo.
#rc_verbose=no

# By default we filter the environment for our running scripts. To allow other
# variables through, add them here. Use a * to allow all variables through.
#rc_env_allow="VAR1 VAR2"

# By default we assume that all daemons will start correctly.
# However, some do not - a classic example is that they fork and return 0 AND
# then child barfs on a configuration error. Or the daemon has a bug and the
# child crashes. You can set the number of milliseconds start-stop-daemon
# waits to check that the daemon is still running after starting here.
# The default is 0 - no checking.
#rc_start_wait=100

# rc_nostop is a list of services which will not stop when changing runlevels.
# This still allows the service itself to be stopped when called directly.
#rc_nostop=""

# rc will attempt to start crashed services by default.
# However, it will not stop them by default as that could bring down other
# critical services.
#rc_crashed_stop=NO
#rc_crashed_start=YES

# Set rc_nocolor to yes if you do not want colors displayed in OpenRC
# output.
#rc_nocolor=NO

##############################################################################
# MISC CONFIGURATION VARIABLES
# There variables are shared between many init scripts

# Set unicode to NO to turn off unicode support for keyboards and screens.
unicode="YES"

# This is how long fuser should wait for a remote server to respond. The
# default is 60 seconds, but  it can be adjusted here.
#rc_fuser_timeout=60

# Below is the default list of network fstypes.
#
# afs ceph cifs coda davfs fuse fuse.glusterfs fuse.sshfs gfs glusterfs lustre
# ncpfs nfs nfs4 ocfs2 shfs smbfs
#
# If you would like to add to this list, you can do so by adding your
# own fstypes to the following variable.
#extra_net_fs_list=""

##############################################################################
# SERVICE CONFIGURATION VARIABLES
# These variables are documented here, but should be configured in
# /etc/conf.d/foo for service foo and NOT enabled here unless you
# really want them to work on a global basis.
# If your service has characters in its name which are not legal in
# shell variable names and you configure the variables for it in this
# file, those characters should be replaced with underscores in the
# variable names as shown below.

# Some daemons are started and stopped via start-stop-daemon.
# We can set some things on a per service basis, like the nicelevel.
# These need to be exported
#export SSD_NICELEVEL="0"
# Or the ionice level. The format is class[:data] , just like the
# --ionice start-stop-daemon parameter.
#export SSD_IONICELEVEL="0:0"
# Or the OOM score adjustment.
#export SSD_OOM_SCORE_ADJ="0"

# Pass ulimit parameters
# If you are using bash in POSIX mode for your shell, note that the
# ulimit command uses a block size of 512 bytes for the -c and -f
# options
#rc_ulimit="-u 30"

# It's possible to define extra dependencies for services like so
#rc_config="/etc/foo"
#rc_need="openvpn"
#rc_use="net.eth0"
#rc_after="clock"
#rc_before="local"
#rc_provide="!net"

# You can also enable the above commands here for each service. Below is an
# example for service foo.
#rc_foo_config="/etc/foo"
#rc_foo_need="openvpn"
#rc_foo_after="clock"

# Below is an example for service foo-bar. Note that the '-' is illegal
# in a shell variable name, so we convert it to an underscore.
# example for service foo-bar.
#rc_foo_bar_config="/etc/foo-bar"
#rc_foo_bar_need="openvpn"
#rc_foo_bar_after="clock"

# You can also remove dependencies.
# This is mainly used for saying which services do NOT provide net.
#rc_net_tap0_provide="!net"

# This is the subsystem type.
# It is used to match against keywords set by the keyword call in the
# depend function of service scripts.
#
# It should be set to the value representing the environment this file is
# PRESENTLY in, not the virtualization the environment is capable of.
# If it is commented out, automatic detection will be used.
#
# The list below shows all possible settings as well as the host
# operating systems where they can be used and autodetected.
#
# ""               - nothing special
# "docker"         - Docker container manager (Linux)
# "podman"         - Podman container manager (Linux)
# "jail"           - Jail (DragonflyBSD or FreeBSD)
# "lxc"            - Linux Containers
# "openvz"         - Linux OpenVZ
# "prefix"         - Prefix
# "rkt"            - CoreOS container management system (Linux)
# "subhurd"        - Hurd subhurds (to be checked)
# "systemd-nspawn" - Container created by systemd-nspawn (Linux)
# "uml"            - Usermode Linux
# "vserver"        - Linux vserver
# "xen0"           - Xen0 Domain (Linux and NetBSD)
# "xenU"           - XenU Domain (Linux and NetBSD)
#rc_sys=""

# if  you use openrc-init, which is currently only available on Linux,
# this is the default runlevel to activate after "sysinit" and "boot"
# when booting.
#rc_default_runlevel="default"

# on Linux and Hurd, this is the number of ttys allocated for logins
# It is used in the consolefont, keymaps, numlock and termencoding
# service scripts.
rc_tty_number=12

##############################################################################
# LINUX CGROUPS RESOURCE MANAGEMENT

# This sets the mode used to mount cgroups.
# "hybrid" mounts cgroups version 2 on /sys/fs/cgroup/unified and
# cgroups version 1 on /sys/fs/cgroup.
# "legacy" mounts cgroups version 1 on /sys/fs/cgroup
# "unified" mounts cgroups version 2 on /sys/fs/cgroup
#rc_cgroup_mode="unified"

# This is a list of controllers which should be enabled for cgroups version 2
# when hybrid mode is being used.
# Controllers listed here will not be available for cgroups version 1.
#rc_cgroup_controllers=""

# This variable contains the cgroups version 2 settings for your services.
# If this is set in this file, the settings will apply to all services.
# If you want different settings for each service, place the settings in
# /etc/conf.d/foo for service foo.
# The format is to specify the setting and value followed by a newline.
# Multiple settings and values can be specified.
# For example, you would use this to set the maximum memory and maximum
# number of pids for a service.
#rc_cgroup_settings="
#memory.max 10485760
#pids.max max
#"
#
# For more information about the adjustments that can be made with
# cgroups version 2, see Documentation/cgroups-v2.txt in the linux kernel
# source tree.
#rc_cgroup_settings=""

# This switch controls whether or not cgroups version 1 controllers are
# individually mounted under
# /sys/fs/cgroup in hybrid or legacy mode.
#rc_controller_cgroups="YES"

# The following setting turns on the memory.use_hierarchy setting in the
# root memory cgroup for cgroups v1.
# It must be set to yes in this file if you want this functionality.
#rc_cgroup_memory_use_hierarchy="NO"

# The following settings allow you to set up values for the cgroups version 1
# controllers for your services.
# They can be set in this file;, however, if you do this, the settings
# will apply to all of your services.
# If you want different settings for each service, place the settings in
# /etc/conf.d/foo for service foo.
# The format is to specify the names of the settings followed by their
# values. Each variable can hold multiple settings.
# For example, you would use this to set the cpu.shares setting in the
# cpu controller to 512 for your service.
# rc_cgroup_cpu="
# cpu.shares 512
# "
#
# For more information about the adjustments that can be made with
# cgroups version 1, see Documentation/cgroups-v1/* in the linux kernel
# source tree.

# Set the blkio controller settings for this service.
#rc_cgroup_blkio=""

# Set the cpu controller settings for this service.
#rc_cgroup_cpu=""

# Add this service to the cpuacct controller (any value means yes).
#rc_cgroup_cpuacct=""

# Set the cpuset controller settings for this service.
#rc_cgroup_cpuset=""

# Set the devices controller settings for this service.
#rc_cgroup_devices=""

# Set the hugetlb controller settings for this service.
#rc_cgroup_hugetlb=""

# Set the memory controller settings for this service.
#rc_cgroup_memory=""

# Set the net_cls controller settings for this service.
#rc_cgroup_net_cls=""

# Set the net_prio controller settings for this service.
#rc_cgroup_net_prio=""

# Set the pids controller settings for this service.
#rc_cgroup_pids=""

# Set this to YES if you want all of the processes in a service's cgroup
# killed when the service is stopped or restarted.
# Be aware that setting this to yes means all of a service's
# child processes will be killed. Keep this in mind if you set this to
# yes here instead of for the individual services in
# /etc/conf.d/<service>.
# To perform this cleanup manually for a stopped service, you can
# execute cgroup_cleanup with /etc/init.d/<service> cgroup_cleanup or
# rc-service <service> cgroup_cleanup.
# If the kernel includes support for cgroup2's cgroup.kill, this is used
# to reliably teardown the cgroup.
# If this fails, the process followed in this cleanup is the following:
# 1. send stopsig (sigterm if it isn't set) to all processes left in the
# cgroup immediately followed by sigcont.
# 2. Send sighup to all processes in the cgroup if rc_send_sighup is
# yes.
# 3. delay for rc_timeout_stopsec seconds.
# 4. send sigkill to all processes in the cgroup unless disabled by
# setting rc_send_sigkill to no.
# rc_cgroup_cleanup="NO"

# If this is yes, we will send sighup to the processes in the cgroup
# immediately after stopsig and sigcont.
#rc_send_sighup="NO"

# This is the amount of time in seconds that we delay after sending sigcont
# and optionally sighup, before we optionally send sigkill to all
# processes in the # cgroup.
# The default is 90 seconds.
#rc_timeout_stopsec="90"

# If this is set to no, we do not send sigkill to all processes in the
# cgroup.
#rc_send_sigkill="YES"

# Set CLOCK to "UTC" if your Hardware Clock is set to UTC (also known as
# Greenwich Mean Time).  If that clock is set to the local time, then
# set CLOCK to "local".  Note that if you dual boot with Windows, then
# you should set it to "local".
#В Windows я использую UTC - загружаюсь очень редко.
clock="UTC"

# If you want the hwclock script to set the system time (software clock)
# to match the current hardware clock during bootup, leave this
# commented out.
# However, you can set this to "NO" if you are running a modern kernel
# and using NTP to synchronize your system clock.
#clock_hctosys="YES"

# If you do not want to set the hardware clock to the current system
# time (software clock) during shutdown, set this to no.
#clock_systohc="YES"

# If you wish to pass any other arguments to hwclock during bootup,
# you may do so here. Alpha users may wish to use --arc or --srm here.
clock_args=""

# Use keymap to specify the default console keymap.  There is a complete tree
# of keymaps in /usr/share/keymaps to choose from.
#keymap="us"
keymap="-u ruwin_cplk-UTF-8"

# Should we first load the 'windowkeys' console keymap?  Most x86 users will
# say "yes" here.  Note that non-x86 users should leave it as "no".
# Loading this keymap will enable VT switching (like ALT+Left/Right)
# using the special windows keys on the linux console.
windowkeys="YES"

# The maps to load for extended keyboards.  Most users will leave this as is.
extended_keymaps=""
#extended_keymaps="backspace keypad euro2"

# Tell dumpkeys(1) to interpret character action codes to be
# from the specified character set.
# This only matters if you set unicode="yes" in /etc/rc.conf.
# For a list of valid sets, run `dumpkeys --help`
dumpkeys_charset=""

# Some fonts map AltGr-E to the currency symbol instead of the Euro.
# To fix this, set to "yes"
fix_euro="NO"

# The consolefont service is not activated by default. If you need to
# use it, you should run "rc-update add consolefont boot" as root.
#
# consolefont specifies the default font that you'd like Linux to use on the
# console.  You can find a good selection of fonts in /usr/share/consolefonts;
# you shouldn't specify the trailing ".psf.gz", just the font name below.
# To use the default console font, comment out the CONSOLEFONT setting below.
consolefont="ter-v18n"

# consoletranslation is the charset map file to use.  Leave commented to use
# the default one.  Have a look in /usr/share/consoletrans for a selection of
# map files you can use.
#consoletranslation="8859-1_to_uni"

# unicodemap is the unicode map file to use. Leave commented to use the
# default one. Have a look in /usr/share/unimaps for a selection of map files
# you can use.
#unicodemap="iso01"

app-admin/syslog-ng
app-admin/testdisk
app-antivirus/clamav
app-arch/p7zip
app-arch/rar
app-cdr/cdemu
app-cdr/cdemu-daemon
app-cdr/gcdemu
app-cdr/kcdemu
app-crypt/sbsigntools
app-doc/anarchism
app-editors/bluefish
app-editors/vim
app-editors/vscode
app-emulation/nemu
app-emulation/q4wine
app-emulation/qemu
app-emulation/wine-vanilla
app-eselect/eselect-repository
app-laptop/laptop-mode-tools
app-misc/binwalk
app-misc/mc
app-misc/media-player-info
app-misc/tmux
app-misc/wayland-utils
app-mobilephone/heimdall
app-office/abiword
app-office/gnucash
app-office/gnumeric
app-office/libreoffice
app-office/scribus
app-office/wps-office
app-pda/libimobiledevice
app-portage/cpuid2cpuflags
app-portage/eix
app-portage/esearch
app-portage/gentoolkit
app-text/antiword
app-text/catdoc
app-text/djview
app-text/ebook-tools
app-text/evince
app-text/fbreader
app-text/pdfgrep
app-text/qpdf
app-text/sdcv
app-text/tree
app-text/zeal
dev-db/postgresql:14
dev-java/openjdk
dev-java/openjdk:21
dev-libs/intel-compute-runtime
dev-libs/libxls
dev-libs/weston
dev-util/androguard
dev-util/android-studio
dev-util/android-tools
dev-util/android-udev-rules
dev-util/apktool
dev-util/clinfo
dev-util/dex2jar
dev-util/ghidra
dev-util/idea-community
dev-util/intel-graphics-system-controller
dev-util/intel-ocl-sdk
dev-util/jadx-bin
dev-util/kdevelop
dev-util/radare2
dev-util/vulkan-tools
dev-vcs/repo
games-simulation/flightgear
games-strategy/vcmi
gnome-extra/gnome-network-displays
gui-apps/foot
gui-apps/kanshi
gui-apps/mako
gui-apps/nm-tray
gui-apps/sway-launcher-desktop
gui-apps/swaybg
gui-apps/swayidle
gui-apps/swaylock
gui-apps/wdisplays
gui-apps/wf-recorder
gui-apps/wlr-randr
gui-apps/wmenu
gui-apps/wofi
gui-wm/hyprland
gui-wm/sway
gui-wm/wayfire
kde-apps/akonadi-import-wizard
kde-apps/akonadiconsole
kde-apps/ark
kde-apps/dolphin
kde-apps/dolphin-plugins-common
kde-apps/ffmpegthumbs
kde-apps/filelight
kde-apps/gwenview
kde-apps/k3b
kde-apps/kamera
kde-apps/kate
kde-apps/kcalc
kde-apps/kdenlive
kde-apps/kdepim-addons
kde-apps/kleopatra
kde-apps/kmail
kde-apps/konsole
kde-apps/kontact
kde-apps/korganizer
kde-apps/kwalletmanager
kde-apps/kwrite
kde-apps/okular
kde-apps/pim-data-exporter
kde-apps/thumbnailers
kde-misc/kdeconnect
kde-misc/skanlite
kde-plasma/plasma-meta
llvm-core/clang:15
mail-client/thunderbird
media-fonts/font-misc-cyrillic
media-fonts/font-screen-cyrillic
media-fonts/libertine
media-fonts/paratype
media-fonts/paratype-astra
media-fonts/roboto
media-fonts/terminus-font
media-fonts/unifont
media-gfx/blender
media-gfx/darktable
media-gfx/digikam
media-gfx/enblend
media-gfx/gimp
media-gfx/gmic
media-gfx/imagemagick
media-gfx/inkscape
media-gfx/krita
media-gfx/luminance-hdr
media-gfx/povray
media-gfx/qrca
media-gfx/rawtherapee
media-gfx/sane-airscan
media-gfx/zart
media-libs/libva-intel-driver
media-libs/libva-intel-media-driver
media-libs/mlt
media-libs/vips
media-libs/vulkan-loader
media-plugins/alsa-plugins
media-sound/alsa-tools
media-sound/alsa-utils
media-sound/audacious
media-sound/audacity
media-sound/bristol
media-sound/pavucontrol
media-sound/qastools
media-sound/strawberry
media-video/avidemux
media-video/cinelerra-gg
media-video/mplayer
media-video/mpv
media-video/natron-bin
media-video/natron-plugins
media-video/obs-studio
media-video/smplayer
media-video/vlc
net-analyzer/netcat
net-analyzer/ntopng
net-analyzer/traceroute
net-im/element-desktop-bin
net-im/teams-for-linux
net-im/telegram-desktop-bin
net-libs/libotr
net-misc/remmina
net-misc/yt-dlp
net-p2p/ctorrent
net-p2p/ktorrent
net-p2p/qbittorrent
net-p2p/rtorrent
net-print/hplip
net-print/hplip-plugin
net-vpn/networkmanager-openvpn
net-wireless/blueman
net-wireless/bluez
net-wireless/crda
net-wireless/hostapd
net-wireless/wireless-regdb
net-wireless/wireless-tools
net-wireless/wpa_supplicant
sci-astronomy/siril
sys-apps/dmidecode
sys-apps/flatpak
sys-apps/hwinfo
sys-apps/sg3_utils
sys-block/partitionmanager
sys-boot/os-prober
sys-boot/ventoy-bin
sys-devel/gcc
sys-firmware/intel-microcode
sys-firmware/sof-firmware
sys-fs/lsscsi
sys-kernel/gentoo-kernel
sys-kernel/gentoo-kernel:6.12.47
sys-kernel/gentoo-sources
sys-kernel/gentoo-sources:6.17.7
sys-kernel/linux-firmware
sys-process/htop
sys-process/lsof
sys-process/nmon
www-client/chromium
www-client/elinks
www-client/firefox
www-client/google-chrome
www-client/seamonkey
www-plugins/chrome-binary-plugins
x11-apps/igt-gpu-tools
x11-apps/mesa-progs
x11-apps/xdpyinfo
x11-apps/xkill
x11-misc/arandr
x11-misc/sddm
x11-wm/fluxbox
x11-wm/icewm